Every time a marine chain is used, the chain must be inspected to ensure the material of the chain, and each link must be inspected, with emphasis on deformation, corrosion and inner ring wear. After use, it should be restored for next use. How to restore the anchor chain after use? Today, Zhongcan Marine Equipment Co., Ltd. recommended several coups to everyone.

When the anchor chain on the ship is used up, the steps to restore the anchor chain are as follows:

1) Screw in the anchor chain, connect the first and second anchor chains, and then screw the anchor chain on the deck into the chain cabin.

2) Unfasten the safety cable, release the strand from the guide cable, then connect it to the anchor shackle, and the other end of the strand is wound around the drum.

3) Twist the stranded cable and release the suspension cable when the suspension cable is loose.

4) Tighten the chain and loosen the twisted cable at the same time. When the anchor is suspended vertically below the chain cylinder, untwist the stranded cable.